Wright Flow Technologies TRA10 series are the traditional workhorse pumps designed for strip-clean (C-O-P) applications.  
      
:: TRA®10 Features 
 
>Time tested and proven circumferential piston design. 
 
>Exceptional engineering and manufacturing quality. 
 
>Parts interchangeable with other major CPP manufacturer's Pumps.
     
:: Wright Flow Technologies offers added value, as standard: 
>One-piece stainless steel shafts instead of welded bi-metal. 
>Helical timing gears instead of spur gears. 
>SiC/SiC seals instead of Carbon/Ceramic. 
>Powder coated casing (FDA white, RAL 9003), instead of painted iron.
>Pump housing dowel pinned and bolted to gear case, instead of dowel pinned only, to protect seals
     
:: Performance Range
>Capacity Range: 0.1 to 450 gpm (0.02 to 102 m3/hr)
>Pressure Range: to 200 PSI/14 Bar *Model 0450 to 400 PSI/27 Bar
>Temperature Range: -40°F to +300°F (-40°C to +150°C)
>Note: Hot clearances required for high temp operation.
>Viscosity Range: 28 to 910,000 SSU (1 to 200,000 cPs) 
 >Note: Consult factory for applications greater than 910,000 SSU/200,000 cSt.
>Chocolate clearances available.
     
:: Unique Cleaning and Maintenance Features 
   
Designed for easy strip cleaning, the pump casing is independently fastened to the gearbox to prevent damage to the seals when the cover is removed, and to allow the rotors to be turned while spraying down the fluid chamber.   
Bearing retainers are stainless steel, not carbon steel, ensuring longer life under harsh cleaning conditions.   
Grease fittings are threaded, not pressed in, to prevent accidental removal during greasing.   
 
 :: TRA10 Pump Operating Parameters

*Rectangular Inlet Flange Models